Products

SMARTCAM

VIDEONYSTAGMOGRAPHY

SMARTCAM

SMARTCAM IS A WIRELESS INFRARED CAMERA THAT CAN BE USED TO DIAGNOSE AND REHABILITATE BALANCE DISORDERS.
MAIN ADVANTAGES
This medical device can provide vestibular information thanks to :
– Wireless communication with the software (on iPad or PC)
– Automatic pupil detection
– Integrated motion sensors
– Integrated fixation light
– Reversible monocular camera that can be used on both eyes
– Thanks to its integrated software, the SmartCam camera will be able to meet future needs.
DESCRIPTION
SmartCam enables you to start with a simple Video Frenzel system (NystaLab) and then to evolve towards a Videonystagmography system (VNG Ulmer or D-VNS) by adding new functions to the same camera.

OPTIONS
– Xpress Mask
– Goggles Flex
CONNECTIVITY
Available on iPad and PC for NystaLab system
Available on PC for VNG system
Available on PC for D-VNS system
STANDARDS
Class IIa medical device (European medical device directive 93/42/EEC)
CLASSIFICATION
FDA approved
EC conformity / EN 60601-1 / EN 60601-1-2
ACCESORIES AND CONSUMABLES
– Xpress Mask is made with a lightweight rubber and an adjustable elastic strap. It’s easy to clean after each use and is convenient for a busy daily practice. The camera and the eye occluder fasten themselves magnetically to the mask.
– Goggles Flex are equipped with foams that make them light and comfortable for the patient. They can be adjusted due to the different sizes of the nose bridge and the elastic strap. The camera and the eye occluder are fastened mechanically to the goggles.
MINIMUM COMPUTER CONFIGURATION
Use with NystaLab system on iPad :
– iOS 8.1 minimum
– Wi-Fi connectivity available
Use with NystaLab system on PC :
–  Windows 7 PRO (32 or 64 bits)
– Windows 8.1 PRO (64 bits)
– Windows 10 PRO (32 or 64 bits)
– Wi-Fi connectivity available
Use with VNG Ulmer system on PC :
– Windows 7 PRO (32 or 64 bits)
– Windows 8.1 PRO (64 bits)
– Windows 10 PRO (32 or 64 bits)
– Wi-Fi connectivity available
– Intel processor I5-xxx (3rd generation)
– 300 Gb of free space on hard disk
– 4 Gb RAM
– Graphic card with dedicated memory – NVIDIA or AMD RADEON type (minimum 2 video output to enable extended mode (dual view))
Use with D-VNS system on PC :
– Windows 7 PRO (32 or 64 bits)
– Windows 8.1 PRO (64 bits)
– Windows 10 PRO (32 or 64 bits)
– Wi-Fi connectivity available
– Intel processor I5-xxx (3rd generation)
– 300 Gb of free space on hard disk
– 4 Gb RAM
– Graphic card with dedicated memory – NVIDIA or AMD RADEON type
TECHNICAL SPECIFICATIONS
Power supply Li-Ion 3.7V – 1130 mAh Batteries
Resolution H : 744 px V : 480 px
Lens 4.3 mm
Built-in fixation light Yes
Power consumption 300 mA
Battery life 4 hours continued use
Battery charge time About 4 hours / battery
Sample rate 25 Hz
Elements included
– 1 user manual
– 1 SmartCam camera
– 1 Xpress Mask or 1 Goggles Flex
– 1 battery charger (4 slots)
– 1 power supply box
– 1 power supply cord
– 3 batteries
– 1 Wi-Fi amplifier
– 1 software CD (except for iPad use: app on Apple Store)
– Packaging : suitcase

Reviews

There are no reviews yet.

Be the first to review “SMARTCAM”

Your email address will not be published. Required fields are marked *

Product Enquiry

Category: